Bell System BL106 Manual do Utilizador descarregar pdf (Página 31)

CS106/BL106 Combined Door Entry and Coded Access

Symptom

Possible Cause/Remedy

button is pressed.

Lock release does not operate

when Exit Button is pressed.



Test by applying a short-circuit directly

to the ‘EXIT’ terminals; Check

connections to Exit button.

Lock operates from the test

button but does not operate

when the code is entered.



Check C106 Keypad is correctly

programmed; Restore to Factory

Settings (page 24, 32);



Time Clock in wrong state; reprogram

action code, manually switch the time

clock.

Lock release is permanently

active



‘EXIT’ terminals are short-circuited;

temporarily remove connections to

‘EXIT’ and re-test unit. Check any exit

button connected to the EXIT terminals

is ‘push to make’ and not the opposite

Can’t change any of the

settings. Green LED is on



‘EXIT’ terminals are short-circuited;

temporarily remove connections to

‘EXIT’ and re-test unit. Check any exit

button connected to the EXIT terminals

is ‘push to make’ and not the opposite

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Sem comentários

Bell System BL106 Manual do Utilizador Página 31